Buffalo WAPS-AG300H Wireless Access Point Firmware Update 1.12.5

User Drivers » LAN / Network Adapter » Buffalo »
Date Added: March 26, 2014 / Release Date: March 21, 2014 / Publisher:Buffalo / File Size: 4.61 MB
OS: Mac OS, Windows

Download

New features from v1.10.1 to v1.12.5 are listed below:

  • (VLAN)
    • Added multiple VLAN functionality.
      You can configure an additional VLAN ID by selecting "Multiple" from each wired port or the SSID’s VLAN mode. If enabled, the specified VLAN ID and additional VLAN ID can be transferred.

Modified features from v1.10.1 to v1.12.5 are listed below:

  • (Wireless)
    • Now you can choose "Basic Rate" from each bandwidth of the rate set (11n 1x and 11n 2x) when you select "User-defined" for the wireless band.
  • (RADIUS)
    • MAC RADIUS authentication now allows re-authentication when a session times out.
  • (WebUI)
    • When a USB device consumes excessive power, the following message is displayed:
      "Connected USB device cannot be used due to excessive power consumption."

Fixed bugs from v1.10.1 to v1.12.5 are listed below:

  • (Proxy ARP)
    • ARP requests between wireless clients with the same SSID may be replied by proxy if proxy ARP is enabled.
  • (Wireless)
    • Fixed the problem of wireless communication not being available when the device’s internal temperature fluctuates between extreme temperature variations.
    • Communication with connected wireless clients can now be established immediately when a wireless client roams.
  • (VLAN)
    • Fixed the communication failure between untagged ports in the following situation:
      2 WAPS-AG300Hs are connected by WDS that is set to "Tagged". 2 wired ports of one WAPS-AG300H are set to "Tagged" and the other’s ports are set to "Untagged".
  • (BN-ADT, WL-ADT)
    • Now all configuration from BN-ADT and WL-ADT can be saved correctly.
    • Fixed the problem of wireless clients from other VLANs than the management VLAN not being counted as wireless clients.
    • Fixed the problem of automatically chosen channels not displaying correctly in WL-ADT.
  • (RADIUS)
    • Fixed session timeouts with RADIUS server and IEEE802.1x/EAP authentication.
  • (LED)
    • Fixed the LED controls when the 11a beacon interval is set to 50 ms or less.

Recent Drivers

Buffalo WAPS-APG600H Wireless Access Point Firmware Update 1.12.5
Buffalo WAPS-AG300H Wireless Access Point Firmware Update 1.12.5
Buffalo WZR-600DHP2 Wireless Router Firmware Update 2.13
Buffalo WAPS-APG600H Wireless Access Point Firmware Update 1.10.1
Buffalo WAPS-AG300H Wireless Access Point Firmware Update 1.10.1