Marvell Yukon Ethernet Controller DOS NDIS2 Driver 9.54.1.3

Date Added: Nov 2009 / OS: DOS / File Size: 36.9 KB / Publisher: Marvell

Download

The driver yuknd.dos is the NDIS2 driver for the Microsoft Network Client for DOS for the Marvell Yukon Ethernet Controller.

Installation

1. Start the installation of the Microsoft Network Client.
2. When you are prompted to select a network adapter, select "Network adapter not shown on list below ...".
3. Enter the path where the files yuknd.dos and oemsetup.inf are located.
4. Select "Marvell(R) Yukon(R) Ethernet Controller".
5. Answer the questions in the following dialogs to best fit your needs.
6. When prompted if the listed options are correct, you should select "Change Network Configuration".
7. Add the protocols that are needed for your network and configure them to best fit your needs.
8. Return from the dialog and confirm that the listed options are correct.
9. Finish the installation of the Microsoft Network Client.
10. If you have more than one network adapter you might want to change the bus number and device number in the protocol.ini as described in the next section.

Recent Drivers

Marvell Yukon Ethernet Controller NDIS6.3 Miniport Driver 12.10.10.3
Marvell Yukon Ethernet Adapter Driver 11.41.3.3 for Windows Vista 32-bit
Marvell Yukon Ethernet Adapter Driver 11.41.3.3 for Windows 7/Server 2008 R2 32-bit
Marvell Yukon Ethernet Adapter Driver 11.41.3.3 for Windows XP/Server 2003 32-bit
Marvell Yukon Ethernet Adapter Driver 11.41.3.3 for Windows 7/Server 2008 R2 64-bit