Download OCZ Vertex Plus/Strata-mSATA SSD Firmware Update 3.55

To start downloading OCZ Vertex Plus/Strata-mSATA SSD Firmware Update 3.55, please choose one of the links from the list below.

Vertex Plus, Strata-mSATA Firmware Update 3.55: firmware_update_vertex_plus_v3.55.zip

Setup:

The System used to do the SSD Updater need to be configured for IDE mode. Setting SATA to AHCI mode will not work in DOS mode and may prevent SSD from being detected.

Reboot System and enter BIOS Setup.
In BIOS Setup, configure SATA to use IDE (mode). (This is to allow SSD to be able to be detected in DOS mode)
Configure Boot Priority with CD/DVD Drive being 1st device on the list.
Save the BIOS Setup and Exit.
Once SSD is updated, User could go back into BIOS Setup and revert configuration back to original settings.

Updater Procedures:

Download the OCZ Updater ISO file for the OCZ SSD drive.
Burn OCZ Updater ISO image to CD disk.
Insert CD disk into CD/DVD ROM drive.
Connect OCZ SSD to System (if Updating SSD not in current running System).
Boot/reboot System using OCZ Updater CD disk.
System should boot to DOS mode.
Select the Option number corresponding to SSD Drive (SSD Drive needing the Update).
When requested to search for SSD Drive, Enter "Y". Found drive should be displayed, Enter the Option number corresponding to the drive.
Updater should program the drive successfully and dispay completion message.
User should be returned to main menu.
Repeat steps 7-10 if doing multiple SSD Drive.
After all SSD Drive have been Updated, Exit program to go into DOS Prompt. Remove CD from CD/DVD ROM Drive and reboot System.

If we have helped you with search of your drivers, you can help us, having put the link to us, from your site or to recommend our site to the friends.

If you have found mistakes during downloading, please email to info@userdrivers.com. We will endeavour to solve these as soon as possible. Other problems, please try to contact publisher's official support.

More Drivers