Download Liteonit LCM-256M3S SSD Firmware Update WRDC A02 for Windows Vista/7/8 x86/x64

To start downloading Liteonit LCM-256M3S SSD Firmware Update WRDC A02 for Windows Vista/7/8 x86/x64, please choose one of the links from the list below.

  1. Liteonit LCM-256M3S 2.5 256GB SSD Firmware Update WRDC A02: LCM-256M3S-WRDC_ZPE.exe

WARNING: As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your solid state drive may not function properly.

Firmware upgrade through the Windows utility

ATTENTION

  1. Backup the Solid-State Drive.
  2. Switch to AC Power.

Procedure

  1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process.
  2. On the first screen, if the target SSD is not listed, select it and then Click "Update".
  3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "OK" to proceed.
  4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
  5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows.
  6. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.

Firmware upgrade through the DOS utility

ATTENTION

  1. Backup the Solid-State Drive.
  2. Switch AC Power.
  3. The DOS utility supports only Intel systems.

Procedure

  1. Go into the DOS sub-directory.
  2. Insert a blank CD-R disc into your CD/DVD R/W drive.
  3. Burn the ISO image into a CD-R media.
  4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system.
  5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system).
  6. Please select the targeted drive once your system boots into DOS.
  7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "Y" to proceed.
  8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows.
  9. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.

If we have helped you with search of your drivers, you can help us, having put the link to us, from your site or to recommend our site to the friends.

If you have found mistakes during downloading, please email to info@userdrivers.com. We will endeavour to solve these as soon as possible. Other problems, please try to contact publisher's official support.

More Drivers

Dell Studio 1457 Broadcom BCM5784M Driver 12.2.1.0 for Windows Vista/7 64-bit
Dell QuickSet 7.1.10 for Windows 2000/XP
Dell Studio 1569 Laptop ATI Mobility Radeon HD5470/HD4200 Driver 8.771.1.0000 for Windows 7 64-bit
Alienware M17x IDT 92HD73C1 Audio Driver 6.10.0.6233 for Windows Vista/7 64-bit
Dell Inspiron N4010 Intel WiFi Link 6200/6250 Driver TRWFW1127D for Windows 7 64-bit
Dell Inspiron M101Z AMD SB820M Driver 1.0.13.89 for Windows 7
Dell Wireless 5620 EVDO-HSPA Mobile Broadband Mini-Card Driver 1.1.100 for Windows XP/Vista/7
Dell Inspiron N5030 Atheros AR9285 WiFi Driver 8.0.0.316 for Windows 7